MICROSCAN

 

To be Discontinued - Call for Availability.

Microscan Quadrus™Microscan Quadrus 2D Code Reader 2D Code Reader 

Microscan Quadrus is a compact fully integrated 2D code reader. Includes decoder, internal optics, and built-in lighting. Quadrus reads Data Matrix symbology from moving parts regardless of label orientation.

  • Read/minute: 300

  • Focal points: 3.0" (7.62cm) to 4" (10.16cm) depending on Reader
    5, 7.5, 10, and 15mil options are available

  • Reads Data Matrix ECC 0-200

  • 10 to 28 VDC input

The Quadrus fixed-mount 2D code reader integrates the camera lens, reader/decoder and light source into a compact, rugged enclosure. The Quadrus is equipped with a state-of-the-art image sensor, microprocessor, and custom lensing. Illumination is provided by an array of 20 high-output LEDs. The Quadrus features built in controls (I/Os, match code routines, trigger lines, etc.)

The new Quadrus 3.0 Data Matrix reader has two new and important software features.

  • Autocalibration

  • Image processing database

  • Fully-integrated

  • IP65 enclosure

  • Easy Setup Program (ESP™)

  • Dynamic reading

  • Real time control features

  • Calibrated focal points

  • Downloadable software

Service options include

  • Installation assistance program

  • Service agreements

  • Training

  • On-site service

  • Extended warranty

Symbologies
The Quadrus reads Data Matrix ECC 0-200 symbology. This is a highly secure and readable code even when torn, damaged or in poor condition. Other symbologies are forth-coming.

Features and Benefits

  • Autocalibration
    Reduces set up time substantially; now a point and one click process; longest set up time is approximately 30 seconds

  • Image processing database
    The Quadrus can recall up to 20 unique, user pre-defined CCD camera settings for reading a wide variety of data matrix symbols

  • Adaptive edge detection algorithm
    Reads labels with contrast variability; both from symbol to symbol and within a symbol

  • Adaptive edge detection algorithm
    Reads low contrast labels

  • Narrow margins - 2x quiet zone
    Reads space constrained labels with small margins (8 pixels)

  • More robust reading with edge detection algorithms in adaptive mode
    Reads symbols more robustly yet at same throughput of 5 decodes per second

  • Much faster decode time when threshold is set to fixed mode
    Reads good quality black and white labels significantly faster yielding throughputs of up to 10 decodes per second

  • ESP™ Auto baud detect
    One click to establish communication

  • ESP™ save configuration file as K-command text file
    Allows customers to save configuration file for embedded use

  • ESP™ terminal data capture mode
    Customers can run tests and save data

  • Simplified ESP™ calibration menu
    Fewer options reduces set up time

  • Daisy chain ID
    Allows daisy chained Quadrus to have identification

General Specifications

Weight  17.6oz (498g)

Housing  IP65

Operating temperature  0° to 40°C (32° to 104°F)

Humidity  5% to 95% non condensing

Light source

Type
High output LEDs
Software-adjustable strobe time

Light collection

Type  CCD array, 659 x 494 pixels progressive scan, square pixel

Communication protocols
RS232, RS422, RS485
Point-to-point, Point-to-point w/ RTS/CTS, Point-to-point w/ XON/XOFF, Point-to-point w/RTS/CTS & XON/XOFF, Polling mode D, Multidrop, User defined, User defined multidrop, RS232 daisy chain

Symbologies read  Data Matrix ECC 0-200

Read parameters

Pitch  +30°

Skew  +30°

Tilt  360°

Read rate  300 reads per minute

Electrical

Power requirement  10 to 28 VDC

Quadrus Standard™ Reader Chart
Data Matrix symbol sizes range from 10 x 10 x 144 x 144 (rows x columns) for square symbols and from 8 x 18 to 16 x 48 for rectangular symbols.

Reader options
Millimeter size denotes the minimum size the unit can read

FIS-6500-0001: The 20 mil Reader (minimum element size)
1.67" x 1.25" at 5" (42.4mm x 31.7mm at 127mm)

FIS-6500-0004: The 5 mil Reader (minimum element size)
0.4" x .3" at 3" (10.1mm x 7.6mm at 76.2mm)

FIS-6500-0005: The 7.5 mil Reader (minimum element size)
.55" x .4" at 4" (13mm x 10.1mm at 101mm)

FIS-6500-0006: The 10 mil Reader (minimum element size)
.7" x .53" at 4" (17.7mm x 13.4mm at 101mm)

FIS-6500-0007: The 15 mil Reader (minimum element size)
.975" x .75" at 4" (24.7mm x 19.0mm at 101mm)

* Scale is 1:1. Codes are for illustrative purposes only.

Pin Assignments

Host Connector
25-pin D-Subminiature Plug		 Trigger Connector
Switchcraft EN3 Socket		 Power Connector
Switchcraft EN3 Plug
Pin #     Function    
1 Signal ground Trigger (in) Power 10 to 28 VDC (in)
2 Transmit data RS232 (out) +12 VDC (out) Power ground
3 Receive data RS232 (in) Ground  
4 Request-to-send (out) Strobe (out)  
5 Clear-to-send (in)    
6 Out-1 (out)    
7 Signal Ground    
8 Out-2 (out)    
9 Strobe (out)    
10 Trigger (in)    
11 Default (in)    
12 In-1 (in)    
13 RXD 485 + (in)    
14 TXD 485 - (out)    
15 Noread/Out-3 (out)    
16 RXD 485 - (in)    
17 Power Ground    
18 Power 10 to 28 VDC (in)    
19 TXD 485 + (out)    
20 Aux transmit data RS232 (out)    
21 In-2 (in)    
22 Ground    
23 Aux receive data RS232 (in)    
24 +12 VDC (out)    
25 New master (in)    

Status lights

Yellow power LED  On power-on

Green status LED  Normal operations: illuminates whenever a bar code symbol is decoded and remains on until a new trigger occurs. Continuous Read or Continuous Read 1 Output: flashes for each good read

Safety certifications

Designed for FCC, TUV, CE, cUL, UL

ISO 9001/Cert. No. 00-1047

Specifications subject to change without notice.

Back to Microscan main

Back to 2D Readers main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.

© Microscan products are copyrights/trademarks of Microscan Systems, Inc.

Microsoft, Microsoft Windows, Microsoft Visual, Microsoft Visual C/C++, Visual, Windows, Microsoft C, Microsoft C++, Microsoft Windows 3.x, Windows 3.x, Windows 95, Windows 2000, Windows NT are trademarks/copyrights of the Microsoft Corporation.