LabelMate PC-1 pre-set label counter, popular option for s-100 or s-200 slitters, count labels and not slit them use count-100, count-200, rewinder, unwinder, label, inspection, counting station, halt signal, cat-2

LABELMATE REWINDERS and UNWINDERS

LABELMATE Heavy-Duty Label Counters and Counting Packages

LABELMATE Counters are backed by the trouble-free 3-Year Parts and Labor Limited Warranty.

LABELMATE Reel-to-Reel Off-Line Counting System RRC-220

The new RRC-220 Reel-to-Reel Counter System brings you maximum convenience in a self-contained table-top Label Counting System. What's more, the RRC-220 is priced to save you big money compared to other Off-Line Counter Packages that use stand-alone Rewinder, Counter and Unwinder Units. You can choose the Encoder Option if you need to make linear measurements as well as numeric label counts. The RRC-220 is a great solution for your label counting needs.

Designed for all-day, everyday use, the RRC-220 Reel-to-Reel Counter System is backed by LABELMATE's famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance. (The Counter Module itself, the Power Supply and the Optical Encoder Warranty Period is One-Year.)

RRC-220 RRC-220 in "Wind-In" Mode

Key Features

Maximum Roll diameter: 10" (254mm)

Label Width: up to 6" (152mm)

Speed: Up to 15" per second

Built-in 6-digit Preset-Counter

Rugged construction

Adjustable label guides

"Wind-In" or "Wind-Out"

Controls

Power On-Off

STOP/RUN

Speed Adjust

Preset Count

Reset Count

Model Description List Price
Call for Discounts!

RRC-220 Self-contained Counter System with a 90-250VAC, 50-60Hz, 60VA Universal Power Supply $1,295

RRC-ENC Optional Encoder that allows linear measurement as well as numeric label count. Factory installed. $495

LABELMATE Full-Size Label Counters & Counting Packages

The LABELMATE PC-1 Pre-set Label Counter is a popular option on our S-100 and S-200 Label Slitters. Many times, however, users just want to count labels but don’t need to slit them. Now, to save users money, LABELMATE has introduced two Label Counting Stations based on the S-100 and S-200 Slitter chasses but without the Slitter function. The LABELMATE COUNT-100 and COUNT-200 Stations will handle label webs up to 6.5- and 9.5-inches wide respectively. A CAT-2 Rewinder pulls the label web through the counter. The versatile new COUNT-100 and COUNT-200 Stations can be used at the output of a printer, or can be used with an Unwinder and a CAT-2 Rewinder to form a stand-alone off-line label inspection / counting station.

The LABELMATE C-100 and C-200 Counters can count up or count down from a preset count to zero as you wish. If desired, when the pre-set count is reached, the LABELMATE C-100 and C-200 can send a “HALT” signal to the LABELMATE CAT-2 Rewinder, causing it to stop.

The Count Stations have lots of versatility. For example, if you want to count labels that are 3-up on your label web, you can set the Counter scaling factor to three and it will read out the actual number of labels that have passed the sensor. The sensor itself is a state-of-the-art infra-red transmissive device that shines through the label web and detects the gap between successive labels. There is a sensitivity control to adjust for different kinds of label webs. There must be a gap between successive labels for the Counter to work.

The LABELMATE C-100 and C-200 Counters are reasonably priced saving hundreds compared to purchasing a complete Slitting Station with Counter. Quality and reliability are cornerstones of the LABELMATE Product Line. Rugged, heavy-gauge welded steel construction and precision parts yield a product of the highest quality. LABELMATE Products are trouble-free and covered by our famous 3-Year Parts and Labor Limited Warranty, by far the longest in the industry.

Save even more on a complete LABELMATE Off-Line COUNT-100 or COUNT-200 Package that includes the Counter plus a Rewinder and an Unwinder. Please see the Price List for complete information about available configurations.

Put a LABELMATE Heavy-Duty Label Counter to work for you, today! If you do need to slit labels, be sure to check out the LABELMATE SLIT-100 and SLIT-200 Complete Off-Line Slitting Stations that are also available with the label counting function described here.

Count your labels as you rewind them or count them off-line!

Model Description Web Width List Price
Call for Discounts!

C-100 Programmable Preset Counter mounted on a chassis with guides to position the label web through the label sensor as your CAT-2 Rewinder pulls the labels through.
- Adjustable sensitivity for different web opacity
- Counts single-row of labels or enter a scaling factor for multi-across labels.
- There must be a gap between successive labels.
- can preset batch size. Count up or down.
- Includes a Halt Control Cable to optionally stop your CAT-2 Rewinder automatically when your job is finished. 6" max $595

C-200 Same features as the C-100 but with wider 10" width capacity 10" max $695

Note: Counters require a CAT-2 Rewinder to pull your labels through the Counter.

C-100 - 6" wide Counter C-200 - 10" wide Counter COUNT-100-PACKAGE

Money-saving Off-line production Counter Packages with Rewinder and Unwinder!

Model Complete Money-Saving Off-Line Counter Packages include all the items listed. Web Width Speed List Price
Call for Discounts!

COUNT-100-DELUXE - C-100 Counter (see above);
- Standard CAT-2 Heavy-duty Rewinder with Fin-Style Core Holder for 3" cores**;
- CAT-2 Standard with Fin-Style Core Holder used as a variable tension-control Unwinder. Provides the maximum control over rewind tension.
- Adjustable Locking Bar to lock units together in position;
- Halt Control Cable to stop Rewinder when job is finished. 6" max Up to 30ips (inches per second) $2,095

COUNT-100-ECONOMY COUNT-100 PACKAGE as above with a UCAT-1 Unwinder instead of a CAT-2 "Unwinder". The UCAT-1 provides limited control over rewind tension.* $1,895

UPG-6QC "Quick-Chuck" Core Chuck in place of Fin-Style Core Holder. +$195 ea.

UPG-ACH 1" to 4" Adjustable Core Holder in place of Fin-Style Core Holder. +$150 ea.

COUNT-200-DELUXE Same as COUNT-100-DELUXE with 10" width capacity 10" max $2,395

COUNT-200-ECONOMY Same as COUNT-100-ECONOMY with 10" width capacity $2,195

UPG-10QC "Quick-Chuck" Core Chuck in place of Fin-Style Core Holder +$245 ea.

- 1-Year Parts and Labor Limited Warranty on the Power Supply and Counter Unit itself. 5-Years Rewinder and Unwinder, 3-Years on all other parts.
- Labels and cores are not included with Counters or Counter Packages.

Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!

Specifications and pricing subject to change without notice.

Back to LABELMATE Main Page

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!