LABELMATE LD-100-S, LD-100-RS & LD-200-RS Label Dispensers

Model - S For very small or unusual shape labels.
The LABELMATE LD-100-S uses a unique concept that solves dispensing problems for very small and unusual labels that most competitors' dispensers can't handle. This Dispenser cleverly strips the label form the label web and then gently places it back on the web ready for the operator to pick at the front of the machine. The LABELMATE LD-100-S can continuously advance labels at the rate you choose or advance labels only when the included Foot Switch is pressed. Add the Optional Label Roll Bracket LRB-12 to allow use of label supply rolls up to 12" in diameter.

Model	Description	Label Width	Label Length	Roll Diam	List Price Call for Discounts!
LD-100-S	Label Dispenser with continuously variable Speed Control and Foot Switch. Ideal for production lines and very small or transparent labels. The optional LD-FLANGES can also be used with the LD-100S.	4.5" max (114mm) No min. width	Not limited	8.6" max (220mm) Core ID 1.5" to 3"	$649

LABELMATE Model - RS With advanced Reflective Sensor – Simple, Reliable and Convenient!
The LABELMATE Models LD-100-RS & LD-200-RS use the latest opto-electronic technology. There is just one simple adjustment for label length. A special Reflective Sensor sits below the label to reliably and accurately sense the leading edge of your label. As you pick up a label the next one is automatically advanced. This modern design presents the label at the front of the machine, providing optimum convenience for both left-handed and right-handed operators. A “HIGH-LOW” Speed switch allows adjustment for label length or operator preference. There are no mechanical position switches to cause adjustment or operational problems. The new Stainless Steel Models are ideal for food industry and pharmaceutical applications.

New! Stainless-steel LD-100-RS-SS	LD-100-RS w/ Optional Flanges & Counter

KEY FEATURES

• Easy loading
• Easy access to dispensed labels.
• Equally convenient for right and left handed operators.
• Works with labels as short as 1/4”.
• Small footprint 9" x 9".
• "HIGH-LOW" Speed Switch.

Model	Description	Label Width	Label Length	Roll Dia.	List Price Call for Discounts!
LD-100-RS	Label Dispenser automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation. Not for transparent labels.	1/2" to 4.5" (25 to 114mm)	0.25" to 8" or more (6 to 150mm)	8.6" max (220mm) Core ID 1.5" to 3"	$549
LD-200-RS	Same features as LD-100RS, but with wider label capacity.	1/2" to 6.5" (25 to 165mm)			$595
LD-100-RS-SS	NEW! LD-100-RS with sleek Stainless-steel chassis and sealed Stainless-steel cover. Ideal for food industry or pharmaceutical applications.	1/2" to 4.5" (25 to 114mm)			$795
LD-200-RS-SS	NEW! Sleek Stainless-steel LD-200-RS	1/2" to 6.5" (25 to 165mm)			$895

Model T for Transparent, Semi-Transparent or Opaque Labels
The LD-100-T & LD-200-T Label Dispensers advance the state-of-the-art of label dispensing with their ability to dispense virtually any type of label: opaque, semi-transparent, or even completely transparent! Using LABELMATE’s patented sensor technology, the dispensers reliably peel your label from its backing and present it ready to pick. As you pick a label from the Dispenser, the next one is automatically advanced. A “HIGH-LOW” Speed Switch and an adjustable Ruggedized Sensor to match label length and solve label curling problems are standard features.

LD-100-T / LD-200-T	with Optional LDC-1 Counter & LD-FLANGES	A Ruggedized Label Sensor is now standard on the LD-100-T & LD-200-T

Add the Optional Label Roll Bracket LRB-12 to allow use of label supply rolls up to 12” in diameter. Add the Optional Flange Plates, FLANGES-LD, for use with narrow labels that may telescope or fall off the Core when placed on the Roll Holder.

Model	Description	Label Width	Label Length	Roll Dia	List Price Call for Discounts!
LDC-1	Optional Label Counter (factory-installed). Not available for Stainless Steel (-SS) models.	Any		-	Add $125
FLANGES-LD	Optional aluminum Flange Plates suggested for use with narrow labels that may have a tendency to telescope or fall off the Core. Set of 2 Flanges. 8.6” (220-mm) in diameter.			Up to 12" (30cm)	$50
LRB-12	NEW! Optional Label Roll Bracket Extension to allow use of label supply rolls up to 12” in diameter. Includes mounting hardware. Installs in minutes. See photo below.				$35

Rugged, heavy-gauge steel construction will stand up to all-day, every-day use. All Dispensers are backed by LABELMATE’s famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance. Put a new LABELMATE Heavy-Duty Label Dispenser to work for you, today!

All LD Models: Size: HWD Approx. 11x9x9-inches (280x229x229-mm). Weight: 14- to 15-lbs (6.4- to 6.8-kg).

NEW! Optional LRB-12 Extension Bracket for any model Label Dispenser allows use of label roll diameters up to 12”.

Back to LABELMATE Main Page

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.