|
|
 |
This product is no longer available, call a RACO sales rep for product options or view the ID TECH main page.
--------------------------------------
ID TECH Trimag™ Custom Three-Track Decoding Chip for Magnetic Stripes
ISO COMPLIANT
ID TECH's TriMag (IDT140) custom digital decoding IC is designed for use with magnetic stripe reading applications. It is capable of decoding up to three tracks of ISO7811 compatible (F2F) magnetically encoded data at velocities from five inches per second (ips) to 55 ips. Additionally, it can accurately decode bit cells with amplitude variations down to 30% and jitter of up to 30% (subinterval) as defined in the ISO7811-2 standards."STATE-OF-THE-ART" ELECTRONICS
This breakthrough in decoding technology utilizes a high density 0.8 um CMOS integrated circuit which results in low power state-of-the-art decoding technology. It is packaged in a low profile 20-pin SOIC format which provides a small footprint and a low-cost solution. A clock pulse is supplied with a data signal for each track of magnetic encoding using Aiken (F2F) code. The chip has a "stand-by" mode which draws less than one microamp of power supply current when enabled. It is versatile; capable of handling single, dual or triple tracks of magnetic data by simply installing the appropriate external components.VERSATILE
This digital decoding IC is supported by ID TECH's field-proved front-end electronics, which are used to amplify and condition most magnetic head outputs. It is uniquely designed to compensate for different magnetic head characteristics by adjusting external component values. ID TECH supports customer applications, both custom and standard, with unequaled customer service and technical support.FEATURES
- State-of-the-art high performance digital integrated circuit
- Supports three tracks of 75/210 bpi magnetic encoding
- Decodes hand swipe speeds of 5 to 55 ips
- Very compact 20-pin SOIC package
- Power supply voltages from 4.5V to 6V
- Operating temperatures from -40 degrees F to 185 degrees F
- Low power consumption of 15mA (3 tracks)
- Separate data outputs with clocks
- Compatible with wide range of magnetic heads
- Available, stand-by mode with less than 1uA current consumption
- Media detect signal from magnetic flux reversals
- Suppresses inherent noise at card entry
- IC master reset
- Provides the most cost effective magnetic decoding solution for multiple tracks
| Specifications | |
| Standard Decoding Densities | Supports 210 bpi and 75 bpi |
| Card Swipe Speed | 5 - 55 inches per second (ISO cards) |
| Operating Voltage | VCC from 4.5V to 6V |
| Operating Temperature | -40º F to 185º F |
| Power Consumption | 15 mA typical |
| Stand-by Mode Power | Less than 1 uA |
| Magnetic Coercivity | 300 - 4,000 Oe. |
| Jitter | ± 15% (± 30% subintervals) |
| Amplitude | 30% of ISO @ 210 bpi; 40% of ISO @ 75 bpi |
| ABSOLUTE MAXIMUM RATINGS | |
| Operating Temperature | -67º F to 257º F (-55º C to 125º C) |
| Storage Temperature | -85º F to 302º F (-65º C to 150º C) |
| Voltage on any Pin except RESET | -1.0V to +7.0V (to GND) |
| Maximum Operating Voltage | 6.6V |
| DC Current per I/O Pin | 40.0 mA |
| DC Current VCC and GND Pins | 140.0 mA |
Call 513-984-2101 or 1-800-446-1991 for the current RACO Discount Price!
Back to ID TECH
RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!
RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!
© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.