|
|
 |
Compsee General Wedge
Keyboard WedgeA device which plugs directly between the terminal keyboard and display - bar code, magnetic stripe and/or ASCII data input via the wedge emulates and complements keyboard entry into the user present software.
Compsee's line of keyboard wedges provides the user the easiest and fastest way to implement a bar code system. When added to existing terminals and applications software, both the speed and accuracy of data input is greatly improved.
We have learned through our years (20+) of installing keyboard wedges, the varied requirements of the user, and in turn design and manufacture the most versatile wedges on the market. With the primary goal of reducing and, in some cases, eliminating operator key entry, numerous features have been designed into the wedge products.
INTERFACES OPTIONS
RS 232 Single Port RS 232 Dual Port RS 232 Keyboard Wedge Terminal Manufacturers Supported (Call for additional information to other terminals) ADDS DATACARE I/O PARADYNE ADI DATA GENERAL INTERCOLOR PHAZE ALCATEL/ITT DEC DIGITAL IBM QUME ALTOS DECISION DATA IS STRATUS=20 AMPEX DELL ITT SUN API DTS LEE DATA TANDEM APPLE EPSON LIBERTY TECHNICON ATT FUJITSU LINK TELETYPE BEEHIVE GATEWAY LYNK TELEVIDEO C‚LINK GRID LAPTOP MAI BASIC IV TELEX C-ITOH HARRIS MEMOREX TEXAS INSTR CABLEDATA HEWLETT PACKARD MICROTERM UNISYS COMPAQ HDSI MOTOROLA VISENTECH COMTERM HONEYWELL NCD WYSE CUMULUS ICL NCR ZENITH DASI IDEA COURIER ORBIT ZENTECBAR CODE SYMBOLOGIES
Auto-discriminates between the following symbologies Code 3 of 9 Code 3 of 9 Extended Interleaved 2 of 5 Industrial 2 of 5 Codabar Code 11 Code 128 Plessey Code 93 Matrix 2 of 5 UPC A EAN/JAN 8 UPC E EAN/JAN 13INPUT OPTIONS
Bar Code Readers (5V readers) - Non-Contact Lasers CCD's Presentation (Slot) Scanners - Contact Wands Bar Code Slot Magnetic Stripe Readers Single Track 1, 2 or 3 Dual Track 1 & 2, 1 & 3 or 2 & 3 Triple Track 1, 2 & 3 RS 232 Auxiliary Input Portable Terminals Scales Slot ScannersWEDGE PROGRAM PARAMETERS
Through wedge programming the user has the ability to validate data input and define the output format for the data.PROGRAM MODESDefault All Reset to Factory Defaults Bar Code Menu Program by scanning individual bar codes for menu selection Bar Code Batch Combine multiple program selections into one bar code for program scanning. (TurboWedge Only) Serial Batch Program selections are communicated to the unit via the RS 232 Port. (TurboWedge Only) On-Screen For PC's only. Menus are displayed on the screen and selections made and transmitted via the keyboard with the unit attached as a keyboard wedge. (TurboWedge Only) AutoCape / WinCape PC Based Program WinCape = TurboWedge Only Wedge Clone Copy the program from one wedge to another. Symbology Validation Program the unit to read only specific bar code types and lengths. (TurboWedge Only)GENERAL PARAMETERS Terminal Type Configure the wedge for the terminal it is attached to Keyboard Type Define the type of keyboard on the terminal Typewriter vs Data Entry 122 Keys vs 102 Keys Caps Lock On vs Caps Lock Off Telephone vs Calculator Foreign Keyboards Sets the keyboard to one of the following: US, Belgium, Finland, Norway, Sweden, France, Germany, Italy, UK, Switzerland. Numeric Keypad Sets the unit to output the key signals from the numeric keypad versus the numeric keys above the alpha keyboard. Buffer Enable If on, the rolling buffer lets the user scan "ahead" of the output Beeper Volume Sets the volume and tone of the audible beep emitted after a bar code is read Mag Track Select Set for the mag track to be read Single Track 1, 2 or 3 Dual Tracks 1 & 2, 1 & 3 or 2 & 3 Triple Tracks 1, 2 and 3 (Track 3 is only valid using the TurboWedge) Solicit Record Define the record used for transmit to activate scale input Intercharacter Delay Sets a delay between transmitted characters Interfunction Delay Sets a delay after the transmission of a keyboard function (Enter, TAB, etc.)BAR CODE INPUT PARAMETERS Preamble Define from 1to 16 Characters or Functions to precede each code scanned Postamble Define from 1to 16 Characters or Functions to follow each code scanned Embedded Function Code Turn ON if keyboard functions are embedded in the bar code Code Identification Outputs a symbology identification code prior to each bar code scanned Redundancy Requires 2 identical reads of the same bar code for a "good read" AutoScan Enables the attached laser to read every "x" numer of seconds. (TurboWedge Only) MultiScan Enables the attached laser to stay on as long as bar codes are being read (TurboWedge Only) Code Enable/Disable Turn on or off specific bar codes Code Length Define the minimum and maximum length for a valid bar code Check Digit Checks Turn on check digit calculation of a specific code Start/Stop Transmit Output the start and stop characters or digits for a specific code Check Digit Transmit Transmit, along with the bar code the check digit character UPC - Code ID Transmit Transmit the UPC code identifierSERIAL PARAMETERS Baud Rate 300 - 19,200 Parity Mark, Space, Even, Odd, None Word Length 7 or 8 data bits Stop Bits 1 or 2 bits Record Terminator End of Transmission character for RS 232 Input Dual Port Enable Transmit RS 232 to Host & Terminal Dual Port Protocol Ready, Xon/Xoff, CTS/RTS, ACK/NAK RS 232 Input Protocol Record, Xon/Xoff, CTS/RTS, Xmodem Fixed Length Enable Set length of data record to be transmitted Transmit Path Transmit to Host and/or Terminal.INPUT DATA EDIT PARAMETERS Qualify by Port Define input port Scanner Auxiliary RS 232 Magnetic Stripe All Ports Qualify by Symbology Define the symbology of the printed bar code or specify all in mag stripe is being used Qualify by Length Define the exact length of the input data record or specify for variable length input Qualify by Data Match Define one or more characters that must be present in specific locations in the input recordOUTPUT DATA EDIT PARAMETERS Add Data Insert additional data into the output record Delete Data Delete data from the input record when formatting the output record Reformat Data Regardless of the input record format, arrange the output format to meet the software application requirements Define 2 Output Formats Define an "activate" label, that when scanned, outputs the second of 2 data output formats defined for a single input recordKEYBOARD MAPPING PARAMETERS Single Key Positions Define the ASCII location for a specific key Swap Two Keys Change the output of one key to another key position Function Records Define the output of a keyboard function (Enter, Tab, F22, ESC, etc. Multiple Key Positions Define the output of a sequence of keys depressions, either consecutive or simultaneouslyEXAMPLES - USER PROGRAMMING 1) Qualify by Length, Symbology and 2 Match Positions - If Code 3 of 9 - Position 4 = M - 12 Digits - Position 7 = T Output Format = Ignore Match Characters, Insert Tab and Enter Input Record: 192M74T93842 Output Format: 192<Tab>7493842<Enter> 2) Qualify by Symbology and 1 Match Position - If Code 128 - Position 8 = 5 - Variable Length Output Format = Ignore Match Character Insert Data and Function Codes Input Record: 00433005920000223 Output Format: 0043300<F9><9001><Enter> 920000223<ALT"B">
RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!
RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!
© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.
© Compsee products are copyrights/trademarks of Compsee.
Microsoft, Microsoft Windows, Microsoft Visual, Microsoft Visual C/C++, Visual, Windows, Microsoft C, Microsoft C++, Microsoft Windows 3.x, Windows 3.x, Windows 95, Windows 2000, Windows NT are trademarks/copyrights of the Microsoft Corporation.
iMac, Apple iMac, Mac, Macintosh, Macintosh computers are trademarks/copyrights of the Apple Computer, Inc.