Magnetic stripe plastic cards, credit cards, pdf, bar codes, chip cards, access control, coercivity, HiCo, LoCo, encoding, magnetic stripes, magnetic fields

Magnetic stripe encoding terms:

Coercivity
A technical term used to designate how strong a magnetic field must be to affect data encoded on a magnetic stripe. Coercivity is measured in Oersteds (Oe). Coercivity is the measure of how difficult it is to encode information in a magnetic stripe.

HiCo
Abbreviation for High Coercivity. HiCo magnetic stripes provide the highest level of immunity to damage by stray magnetic fields. They are more difficult to encode than LoCo magnetic stripes because the encoding requires more power. HiCo magnetic stripe cards are slightly more expensive for this reason.

LoCo
Abbreviation for Low Coercivity. Easier to encode and slightly less expensive than HiCo magnetic stripe cards.

Selecting which type of magnetic stripe to adopt depends on how the card is to be used. Will the mag stripe be used daily, once a month, or just a couple of times a year? The chart below shows some of the applications where magnetic stripes are used and which stripe is common for that application.

Applications	LoCo	HiCo	Usage
Access Control		l	daily
Retail Customer Loyalty Cards	l		weekly
Membership Cards	l		weekly/monthly
Time and Attendance		l	daily
Debit/Credit	International	United States	weekly/monthly
Drivers License		l	Occasionally, but HiCo required by most states.

The easiest way to determine visually if a stripe on a card is HiCo or LoCo is by the color. HiCo stripes are black and LoCo stripes are a lighter brown. Magnetic stripe readers are "blind" as to whether a stripe is HiCo or LoCo and are designed to read both.

Another term often used is Stripe-up and Stripe-down. Stripe-up means the magnetic stripe is on the front of the card and Stripe-down means the magnetic stripe is on the back of the card. This information is important when ordering a printer since the magnetic encoder must be installed differently for Stripe-up and Stripe-down models at the factory. The most common is Stripe-down.

All Zebra Encoders follow the ISO standard for encoding, but can be changed via the Microsoft Windows™ driver to enable proprietary encoding. Proprietary encoding offers greater security and most readers can also be easily reprogrammed to read custom encoding.